If you wish to contribute or participate in the discussions about articles you are invited to join SKYbrary as a registered user

 Actions

Work in progress

Difference between revisions of "Side-step Manoeuvre"

From SKYbrary Wiki

(Go-around from a Side-step Manoeuvre)
Line 14: Line 14:
  
 
==Go-around from a Side-step Manoeuvre==
 
==Go-around from a Side-step Manoeuvre==
  b. Aircraft that will execute a side−step maneuver will be cleared for a specified approach procedure and landing on the adjacent parallel runway. Example, “cleared ILS runway 7 left approach, side−step to runway 7 right.”  NOTE− Side−step minima are flown to a Minimum Descent Altitude (MDA) regardless of the approach authorized. c. Landing minimums to the adjacent runway will be based on nonprecision criteria and therefore higher than the precision minimums to the primary runway, but will normally be lower than the published circling minimums.
+
Aircraft that will execute a side−step maneuver will be cleared for a specified approach procedure and landing on the adjacent parallel runway. Example, “cleared ILS runway 7 left approach, side−step to runway 7 right.”  NOTE− Side−step minima are flown to a Minimum Descent Altitude (MDA) regardless of the approach authorized. c. Landing minimums to the adjacent runway will be based on nonprecision criteria and therefore higher than the precision minimums to the primary runway, but will normally be lower than the published circling minimums.
  
 
==Related Articles==
 
==Related Articles==

Revision as of 14:41, 10 November 2019

Article Information
Category: General General
Content source: SKYbrary About SKYbrary
Content control: SKYbrary About SKYbrary
Ambox content.png
The present article is under construction.
Reader enquiries are welcome, contact the editor: editor@skybrary.aero.
Ambox content.png

Description

A side-step manoeuvre, allowed by some National Aviation Authority (NAA), is an Instrument Flight Rules (IFR) approach profile to closely spaced parallel runways in which the aircraft conducts the approach to one of the runways but lands on the other.

Discussion

Side-step manoeuvres are only permitted on parallel runways that are separated by 1200' or less. Where side-step manoeuvres are authorised, ATC may clear an aircraft to conduct a standard instrument approach procedure to either one of the parallel runways to be followed by a straight−in landing on the adjacent runway. The ATC clearance will specify the approach procedure to be flown as well as the landing runway. For example, "cleared ILS approach runway 26 left, side-step to runway 26 right", or similar wording. Pilots are expected to commence the side−step manoeuvre as soon as possible after the runway or runway environment is in sight. Compliance with any minimum altitudes, that are associated with stepdown fixes, is expected, even after the side−step manoeuvre is initiated.

Go-around from a Side-step Manoeuvre

Aircraft that will execute a side−step maneuver will be cleared for a specified approach procedure and landing on the adjacent parallel runway. Example, “cleared ILS runway 7 left approach, side−step to runway 7 right.” NOTE− Side−step minima are flown to a Minimum Descent Altitude (MDA) regardless of the approach authorized. c. Landing minimums to the adjacent runway will be based on nonprecision criteria and therefore higher than the precision minimums to the primary runway, but will normally be lower than the published circling minimums.

Related Articles

Further Reading

Federal Aviation Administration (FAA)

International Civil Aviation Organisation (ICAO)

  • ICAO Annex 6: Operation of Aircraft;
  • ICAO Doc 8168: Procedures for Air Navigation Services - Aircraft Operations (PANS-OPS) Vol I - Flight Procedures);