Passenger Boarding Bridge
From SKYbrary Wiki
A Passenger Boarding Bridge (PBB) (also known as an air bridge, jet bridge, jetway, and sky bridge as well as by other terms) is an enclosed, elevated passageway which extends from an airport terminal gate to an airplane. The PBB allows passengers to board and disembark an aircraft without the requirement to go outside or to be exposed to the elements. Passenger Boarding Bridges can be found in many configurations and may be fixed or movable depending upon the installation.
Moving passengers from the terminal to an aircraft, and from the aircraft back to the terminal, efficiently, expeditiously and safely is a major objective of efficient airport operations. At smaller airports and those with low traffic volume, passengers will often leave the terminal and walk outdoors across the apron to board the aircraft via mobile boarding stairs or, in some cases, airstairs if the aircraft is so equipped. Passengers may also be taken to a remote parking stand by bus but the final segment of their journey to the aircraft is still on foot from the bus to the aircraft. Ensuring passenger safety on the ramp is manpower intensive and becomes increasingly more difficult as passenger numbers or the volume of aircraft and consequent Ground Handling traffic increase. The use of Passenger Boarding Bridges mitigates most of the risks associated with the requirement to allow passengers to access the ramp.
Boarding Bridge Configuration
In its earliest and most basic configuration, a Passenger Boarding Bridge consisted of a fixed platform, which may or may not have been height adjustable, connected to the terminal building by an enclosed bridge. The aircraft would follow the ground marshaller or the stand entry guidance and stop with the aircraft door abeam the platform. A retractable gantry would then be extended from the platform to allow passengers access to the aircraft. Although relatively rare, there are PBBs of this type still in use.
Passenger Boarding Bridges are now, more typically, mobile units which use an articulating mount to fasten them to the terminal at one end and are supported on powered wheels at the other end with the bridge between built as an extendable tube. This arrangement allows the bridge to be retracted and moved out of the aircraft safety zone during aircraft arrival and departure and, once the aircraft is parked and secure, manoeuvred by a trained operator to come in contact with the aircraft at the desired boarding door. These units are height adjustable to allow use with multiple aircraft types.
Further refinements of the PBB include split bridges which, from a common airport terminal access point, eventually divide into two passageways, each servicing a different aircraft door. Most of these are designed to accommodate two boarding doors forward of the wing on the same level as would be the case on large aircraft such as the Boeing 777 or the Airbus A330. However, there are split bridges that are designed to access doors on two levels to accommodate boarding of the Airbus A380 as well as some installations that have an "over-the-wing" capability to allow simultaneous boarding of the aircraft via both a forward and a rear door. Refinements in proximity sensors, which are mounted on the PBB, are also routinely being engineered to help prevent accidental aircraft damage due to abrupt contact by the moving bridge.
The advantages of a Passenger Boarding Bridge over mobile boarding stairs are numerous. These include:
- Safety - passengers are not exposed to the numerous safety risks present on a busy ramp area. These include, but are not limited to, vehicle traffic, moving aircraft, prop wash and jet blast, and temperature and weather extremes
- Security - requiring passengers to leave the airport terminal to walk to the aircraft also means that those passengers have been granted temporary access to a restricted area of the airport. Use of a PBB eliminates the potential security risks associated with passenger access to the ramp
- Ease of Access - in most situations, use of a PBB eliminates the need for any stairs between the airport boarding gate and the aircraft. This greatly facilitates access for the elderly or infirm and negates the requirement for specialised ground handling equipment such as lift trucks to support wheel chair access
- Reduced Manpower Requirement - the need to provide manpower for ramp supervision during passenger boarding/deplaning is eliminated. Boarding passes are inspected as passengers enter the PBB and from there, passengers move directly to the aircraft via a safe and secure environment
- Passenger Comfort - the PBB is enclosed and often is also heated or cooled, as appropriate, ensuring that passengers are not exposed to precipitation or to extremes of temperature
- Aircraft Ground Services - ground support services such as ground power and aircraft environmental control (heating/cooling) are often built into the PBB eliminating the need for mobile equipment
Disadvantages and Risk
The major risk associated with use of a Passenger Boarding Bridge is aircraft damage. This damage can be classified as follows:
- Engine Damage - although increasingly more rare, fixed pedestal PBB installations are still in use. These require that the aircraft be taxied up to the structure and stop at a specific point. Overshooting that point in aircraft with a short boarding door to engine nacelle distance can potentially bring the engine in contact with the PBB structure
- Fuselage Damage - by design, the PBB will be brought into contact with the aircraft at the boarding door. Proximity switch failure, inadequate operator training or poor operator technique can all lead to the PBB striking the aircraft with greater than intended force. This can lead to dents, skin puncture or structural damage to the aircraft
- Door Damage - Aircraft landing gear struts will extend or compress as the aircraft weight changes during loading and offloading. Most, but not all, PBB are designed to self adjust to maintain the appropriate relative height as the aircraft moves. Should the auto-level mechanism fail, or the bridge operator fail to make manual adjustments when required, the bottom of the outward opening aircraft door may come in contact with the floor of the PBB causing damage to the door
There are also a number of disadvantages associated with the installation of a Passenger Boarding Bridge. Some of these are as follows:
- Terminal Design - PPBs can only be used for parking stands adjacent to the terminal structure. Using them exclusively requires that terminals have long "fingers" with ramp areas in between or that multiple terminal buildings are used. Whilst older design terminals can be retrofitted to include PBBs, it is likely that a need for remote stands, busses and boarding stairs will remain
- Commuter Aircraft - most commuter aircraft such as the Dash 8, the ATR 42/72 and the Bombardier CRJ have boarding stairs built into the aircraft door. While a PBB can be adapted for use with these aircraft, the solution can be somewhat cumbersome and the use of the PBB often reduces the ramp capacity for these aircraft types
- Ground Handling
- Passenger Cabin Loading
- Passenger Safety on Ramp
- Precautionary Rapid Disembarkation
- Refuelling with Passengers on Board
- Stand Entry Guidance Systems