If you wish to contribute or participate in the discussions about articles you are invited to join SKYbrary as a registered user
Communication Equipment Technical Problems
From SKYbrary Wiki
Did you know that you can comment and suggest improvements to this article? Click here!
|Category:||Air Ground Communication|
Sound communications rely on reliable and efficient communication equipment. This article deals with technical problems involving communication equipment.
Types of Equipment Problem
The problems which contribute most commonly to communication breakdown are:
- Airborne radio equipment malfunction;
- Ground equipment malfunction; and,
- Stuck microphone selector.
Impairment of communication, or complete or partial loss of communication.
Duplication of equipment makes complete loss of communication an extremely rare event.
- Sleeping receiver. Pilot realises that he/she has heard no communication from ATC or from other aircraft for some time. Pilot transmits successfully to ATC and finds that ATC have been trying unsuccessfully to make contact for some time. Post-flight investigations reveal no identifiable fault in the radio equipment.
- Airborne Equipment. Pilot select a new frequency but equipment does not respond to change, so pilot is unable to transmit or receive on this frequency.
- Stuck Microphone. Microphone remains live after pressure on the transmit switch used has been released, blocking other transmissions on this frequency.
- Flight crew should always record occurrences as defects in the Aircraft Technical Log after flight. This will provide usable data and ensure that a technical asessment/response is made, recorded and signed for.
- Pilots and ATCOs report any equipment malfunction, including suspected sleeping receiver, using the national occurrence reporting system, to enable trends to be detected.
- Operators and ATCUs report equipment malfunctions to the manufacturer to allow improvements to be made to equipment.
- National authorities continue to investigate sleeping receivers in order to develop solutions.