From SKYbrary Wiki
B190 / Revision as of 09:27, 8 December 2014 by Integrator2
The Beechcraft 1900 is a 19-passenger, pressurized twin-engine turboprop fixed-wing aircraft manufactured by the Beechcraft Division of the Raytheon Company (now Textron Aviation).The 1900 first flew on September 3, 1982.Raytheon ended production of the Beechcraft 1900 in October 2002.
|Wing span||17.7 m58.071 ft |
|Length||17.6 m57.743 ft |
|Height||4.7 m15.42 ft |
|Powerplant||1900C: 2 x 1.100 SHP P&W PT6A - 65B turboprops with 4 blade propellers.
1900D: 2 x 1.279 SHP P&W PT6A - 67D turboprops with 4 blade propellers.
|Engine model||Pratt & Whitney Canada PT6|
(to 5000 ft)
|MACH Climb||Cruise||Initial Descent
|V2 (IAS)||kts||IAS||kts||IAS||kts||IAS||kts||MACH||TAS||280 kts||MACH||IAS||kts||IAS||kts||Vapp (IAS)||kts|
Accidents & Serious Incidents involving B190
- B190 / B190, Auckland NZ, 2007 (On 1 August 2007, the crew of a Beech 1900 aircraft holding on an angled taxiway at Auckland International Airport mistakenly accepted the take-off clearance for another Beech 1900 that was waiting on the runway and which had a somewhat similar call sign. The pilots of both aircraft read back the clearance. The aerodrome controller heard, but did not react to, the crossed transmissions. The holding aircraft entered the runway in front of the cleared aircraft, which had commenced its take-off. The pilots of both aircraft took avoiding action and stopped on the runway without any damage or injury.)
- B190 / B737, Calgary Canada, 2014 (On 29 March 2014, a Beech 1900D being taxied by maintenance personnel at Calgary entered the active runway without clearance in good visibility at night as a Boeing 737-700 was taking off. The 737 passed safely overhead. The Investigation found that the taxiing aircraft had taken a route completely contrary to the accepted clearance and that the engineer on control of the aircraft had not received any relevant training. Although the airport had ASDE in operation, a transponder code was not issued to the taxiing aircraft as required and stop bar crossing detection was not enabled at the time.)
- B190 / BE9L, Quincy IL USA, 1996 (On 19 November 1996, a Beech 1900C which had just landed and a Beech King Air A90 which was taking off collided at the intersection of two runways at the non-Towered Quincy Municipal Airport. Both aircraft were destroyed by impact forces and fire and all occupants of both aircraft were killed. The Investigation found that the King Air pilots had failed to monitor the CTAF or properly scan visually for traffic. The loss of life of the Beech 1900 occupants, who had probably survived the impact, was attributed largely to inability to open the main door of the aircraft.)
- B190, Blue River BC Canada, 2012 (On 17 March 2012, the Captain of a Beech 1900C operating a revenue passenger flight lost control of the aircraft during landing on the 18metre wide runway at destination after an unstabilised day visual approach and the aircraft veered off it into deep snow. The Investigation found that the Operator had not specified any stable approach criteria and was not required to do so. It was also noted that VFR minima had been violated and, noting a fatal accident at the same aerodrome five months previously, concluded that the Operators risk assessment and risk management processes were systemically deficient.)
- B190, vicinity Bebi south eastern Nigeria, 2008 (On 15 March 2008, a Beech 1900D on a non-revenue positioning flight to a private airstrip in mountainous terrain flown by an inadequately-briefed crew without sufficient guidance or previous relevant experience impacted terrain under power whilst trying to locate the destination visually after failing to respond to a series of GPWS Alerts and a final PULL UP Warning. Whilst attributing the accident to the crew, the Investigation also found a range of contributory deficiencies in respect of the Operator, official charting and ATS provision and additional deficiencies in the conduct of the unsuccessful SAR activity after the aircraft became overdue.)
- B190, vicinity Charlotte NC USA, 2003 (On 8 January 2003, a B190, operated by Air Midwest, crashed shortly after take off from Charlotte, NC, USA, following loss of pitch control during takeoff. The accident was attributed to incorrect rigging of the elevator control system compounded by the airplane being outside load and balance limitations.)
- B190, vicinity Lihue Hawaii, 2008 (On 14 January 2008, a single pilot Beech 1900C on a non scheduled mail flight which had departed from Honolulu disappeared during a visual dark night approach at its destination. The Investigation concluded that the pilot had become spatially disoriented and lost control of the aircraft.)
- SF34 / B190, Auckland NZ, 2007 (On 29 May 2007, a Saab 340 aircraft that was holding on an angled taxiway at Auckland International Airport was inadvertently cleared to line up in front of a landing Raytheon 1900D. The aerodrome controller transmitted an amended clearance, but the transmission crossed with that of the Saab crew reading back the line-up clearance. The pilots of both aircraft took action to avoid a collision and stopped on the runway without any damage or injury.)